- COPPER + ALLOYS
Product / type
Application
Thickness range
% Conc.
Drawlub C 100-Series
(emulsion)
Rod- and intermediate wire drawing
15 mm to 1.0 mm
10 to 20%
Drawlub C 201-Series
(emulsion)
Especially for galvanized wire. Intermediate, multi, fine and enamelled wire drawing.
3.5 mm to0.10 mm
5.0 to 15%
Drawlub C 301-Series
(emulsion)
Intermediate, multi, fine and enamelled wire drawing, flat rolling
3.5 mm to0.10 mm
5.0 to 15%
Drawlub C 400-Series (synthetic solution)
Copper fine and extra fine wire drawing
0.45 mm to 0.015 mm
1.5 to 11.00%
Drawlub C901
(neat oil)
V/40 = 61 mm / s
Profile wire drawing oil for copper and alloy e.g. trolley wire, very bright surfae, low consumption, long service life
Profile wire drawing (e.g. trolley wire)
100%
Iso-Mill CU 50 (emulsion)
Emulsion, meta-stable
For rolling of cooper + alloys with different friction.
For copper profile drawing For deep drawing and metal forming operations
- ALUMINIUM+ALLOYS
Product / type
Application
Thickness range
% Conc.
Isolube 4683 (neat oil)
V/40 = 130 mm / s
For pure aluminium and alloys, easy to strand, none water miscible
9.5 mm to 1.0 mm
100%
Isolube 4686
(neat oil)
V/40 = 128 mm / s
For pure aluminium and hard alloys, easy to strand none water miscible.
9.5 mm to 1.0 mm
100%
Isolube 4696
(neat oil)
V/40 = 530 mm / s
For pure aluminium, hard alloy and specific operations like sector drawing, especially for low speed machines, none water miscible
9.5 mm to 1.0 mm
100%
Isolube 4699
(neat oil)
For pure aluminium, hard alloy. Especially for low speed machines, none water miscible
9.5 mm to 1.0 mm
100%
Isolube 4660
(neat oil)
V/40 = 61 mm / s
High performance oil for pure aluminium (and alloy), especially for high speed machines, very bright wire, low consumption
6.5 mm to 0.15 mm
100%
Drawlub AL 100
(emulsion)
Emulsion for aluminium + alloys intermediate wire drawing.
3.5 mm to 0.40 mm
10 to 20 %
Iso- Mill K 9-Serie
(emulsion)
Emulsion, meta-stable
For hot rolling of aluminium + alloys e.g. on Properzi mills
Continuous Casting
5 to 15 %